The Knowledge of Various Hard Flooring Types

Generally, installing hard floors is the work of experts, considering the materials are heavy and require accurate installation. However, there are various hard flooring types that you can install by yourself.

Hard Flooring Types Pros and Cons

Pros of Hard Flooring

• Long-lasting and durable
• The longer it will look nicer
• Maintenance is easy and stain-resistant, if coated

Cons of Hard Flooring

• Hard/uncomfortable for the feet (not a good choice for a kitchen for those who like to cook).
• Noisy, not practical for flats or apartments, which rents apartments many suggest the use of soft floors for flats.
• Heavy. Basic floor or rafter/joist may be strengthened, especially on the upper floors. Slippery when wet.

The Various of Hard Flooring Types

Bricks

Bricks flooring with fishbone pattern

Bricks, hard flooring types are effective for an entrance hall, living room with the home nuanced certain period, as well as a greenhouse, but it is not practical for the kitchen. The bricks are easily eroded and highly absorbing water when it is not coated.

Ceramic tiles

Ceramic raw materials commonly used is felspard, ball clay, quartz, kaolin, and water

Ceramic tiles are suitable for the hall, kitchen, dining room and greenhouse. Ceramic tiles are thicker and stronger than the wall tiles. Without a lot of glazing, so it is not slippery. Do not install the wall tiles on the floor.

Quarry tiles

Various color of the old quarry tiles flooring

The third hard flooring types are quarry tile, made of hard clay with variety colors of soil. Quarry tile are generally porous, so it needs to be coated. Matched anywhere. Simple appearance is preferred.

Terracotta tiles

Terracotta tiles with small decorative tiles

Terracotta tiles can be fragile. Buy a tile recycled from the second-hand goods seller, or new with the surface a bit old.

Encaustic tiles

victorian tiles create a stylish and durable flooring for the room entrance

Tiles encaustic also called Victorian tiles, because it is often found in the corridor and porch built in this era. The pattern, generally geometrical or heraldic, made in the form of inlay that never goes out.

Concrete floors

Concrete floor is low quality concrete layer with a thickness generally about 5 cm

Concrete floors commonly used as the base of a modern home, but it could be a good floor surface if it smooth (but not polished) and resin coated with a special anti-slippery. Concrete can be installed in the form of chunks or poured on the floor. Concrete can also be colored with pigments or installed decorative materials.

Paving stone

At this day, paving block (concrete brick) is a composition of building materials made from a mixture of portland cement or adhesive materials like hydraulic and water

The original paving stone can still be found in homes with the nuances period, which proves the quality of durability. Now many types of stone that make the floor more practical and attractive. Reshaped stone chunks, turn out into an economical choice. This form is sold in garden supply stores, and can be used indoors if given enough coating.

Slate tiles

Surface Design of Slate Tiles

This hard flooring type is usually a bit rough (coarse) so it’s not slick and safe for a foot. However, this type is quite difficult to clean. Make sure you buy the tiles is for floors, not for the roof or lining the walls.

Wood floors

Hardwood floor with fishbone pattern

One of the most popular hard flooring types. In many homes, although not commonly found in homes are newer, cover the floor made from the floorboards installed on the rafters. Old wooden boards can be renovated and the surface that has been damaged can be turned around, and then reassembled (which is the work of the experts). Flooring materials can also be patterned composition of wooden blocks into a fishbone pattern, pictorial floor or intricately patterned (parquet). If you have one of these types, you may need a little renovating. But do not paint the parquet floor.

Wood strips

Wood strip surface

Wood strips, panels, and veneer is a solid wood alternative. These varieties are made from the thin layers of wood (veneer) of the support that is cheaper. Sometimes the process can be done by a layman. Distinguish between laminating made by humans with the real wood.

Plywood

Indeed, plywood is not included in luxury materials. The price is relatively inexpensive, almost no special of the wood grain on the cross-section plywood.

Plywood can be used as a floor completely, or used as a base floor leveler. Plywood with the surface made from the birch or maple would look very stylish in a modern living room.

The granite floor is the right choice for those who want the luxury look in your home

Actually, hard flooring types is still much more along with the development of technology. However, due to time constraints this discussion we end up here. If my friends want to add other hard flooring types, please comment below.

So, that is the knowledge of various hard flooring types. Hopefully, this article can helpful for the readers. Thank you for visit our blog. Do not forget to share this article for helpful the others readers.